Index

`AbbreviationZoneFormat`
`AliasName`	Alternative name (i.e. alias) of the time zone
`AtGmtTime`	GMT time rule.
`AtLocalMeanTime`	Local mean time rule.
`AtNauticalTime`	Nautical time rule.
`AtTime`	First, the time that something happens (in the AT column) is not necessarily the local wall clock time.
`AtUtcTime`	UTC time rule.
`AtWallClockTime`	Wall clock time rule.
`BasedZoneRule`
`Chronology`	Generic base interface of a calendar system.
`Clock`	A clock providing access to the current instant, date and time using a time-zone.
`Date`	An interface for date objects in the ISO-8601 calendar system.
`DateBehavior`	Common behavior for date types.
`DateRange`	Implementation of `Range` and allows easy iteration between `Date` types.
`DateTime`	An abstract moment in time (like 4pm, October 21. 2012).
`DateTimeBehavior`	Common behavior of the `DateTime` types.
`DateTimeRange`	Implementation of `Range` and allows easy iteration between `DateTime` types.
`DayOfMonth`	Alias to represent a specific day.
`DayOfWeek`	A day of week, such as 'tuesday'.
`Duration`	Duration specifies a discreet amount of milliseconds between two instances of time.
`GregorianCalendar`	Base class for a gregorian calendar chronology.
`GregorianDate`	Default implementation of a gregorian calendar
`GregorianDateTime`	Default implementation of a gregorian calendar
`GregorianYearMonth`
`GregorianZonedDateTime`	Default implementation of gregorian calendar thats makes use of a `TimeZone` for it´s operations.
`Instant`	A specific instant of time on a continuous time-scale.
`LeapYear`	An interface for calendar system that defines leap year rules.
`Link`	Tuple representing the Timezone aliasing rules.
`Month`	A month in a Gregorian or Julian calendar system.
`MonthBehavior`	Common behavior for month types.
`OffsetTimeZone`	A simple time zone with a constant offset from UTC.
`OnDay`	Rule describing the day a rule applieds to.
`OnFirstOfMonth`	Represents a day equal to or higher than a day of week.
`OnFixedDay`	Represents a fixed day of month.
`OnLastOfMonth`	Represents the last day of week, for example:
`PairAbbreviationZoneFormat`
`Period`	An immutable period consisting of the ISO-8601 years, months, days, hours, minutes, seconds and milliseconds, such as '3…
`PeriodBehavior`	Common behavior of objects representing a period.
`PeriodZoneRule`
`Range`	An interface to represent a Range between same kinds of Date or DateTime or Time.
`ReadableDate`	A common interface of all date like objects.
`ReadableDatePeriod`	A period of days, months and years.
`ReadableDateTime`	Common interface that can represent particular time of day on a specific date.
`ReadableDuration`	An abstraction of data representing a specific duration of time.
`ReadableInstant`	An abstraction for data that can represent an instant of time.
`ReadableMonth`	A common interface of all month like objects.
`ReadablePeriod`	A Period of time represented as number of years, months, days, hours, minutes, seconds and/or milliseconds.
`ReadableTime`	Common interface capable of representing time of day.
`ReadableTimePeriod`	A period of hours, minutes, seconds and milliseconds.
`ReadableTimeZone`	Common interface that can hold a reference to a specific time zone.
`ReadableYear`	A common interface of all year like objects.
`ReadableZoneDateTime`	Common interface that can represent particular time of day on a specific date in a specific time zone.
`RealName`	Canonical name of the timezone link expression
`ReplacedZoneFormat`
`Rule`	Timezone transition rule.
`RuleBasedTimezone`	This represents offsets based on daylight saving time.
`RuleName`	Parse current token using http://www.cstdbill.com/tzdb/tz-how-to.html columns as reference
`Signal`	Alias to represent a specific signal:
`Time`	Time of day like 6pm or 8.30am.
`TimeBehavior`	Common behavior for the types that represent time.
`TimeOfDay`	Basic implementation of `Time` interface, representing an abstract time of day such as 10am or 3.20pm with a precision of…
`TimeRange`	Implementation of `Range` and allows easy iteration between `Time` types.
`TimeZone`	The interface representing a timezone.
`UnitOfDate`	Represents units of Date
`UnitOfDay`
`UnitOfHour`
`UnitOfMillisecond`
`UnitOfMinute`
`UnitOfMonth`
`UnitOfSecond`
`UnitOfTime`	Represents units of Time
`UnitOfYear`
`Year`	Alias to represent a specific year.
`YearBehavior`	Common behavior for year types.
`YearMonth`	An interface for year and month objects representation in the ISO-8601 calendar system.
`ZoneDateTime`	Instant of time in a specific time zone.
`ZoneFormat`	It can have one of four forms:
`ZoneName`
`ZoneRule`	Whether daylight saving time is being observed:
`ZoneTimeline`
`ZoneUntil`	To represent a `ZoneTimeline` that continues until the present you should use `untilPresent`
`adjustedMod()`	Returns an adjusted remainder of the two integers.
`april`	April.
`august`	August.
`date()`	Returns a date based on the specified year, month and day of month values.
`dateTime()`	Returns a date based on the specified year, month and day of month values.
`dayOfWeek()`	Returns `DayOfWeek` from the input.
`days`	Common properties and constraints of day unit.
`december`	December.
`february`	February.
`fixedTime()`	Gets a clock that always returns the same instant in the UTC time-zone.
`floor()`	Returns the largest integer less than or equal to x.
`floorDiv()`	Returns floored division of the two integers.
`floorMod()`	Returns the floor remainder (modulus) of the two integers.
`friday`	Friday is the day of the week that follows Thursday and precedes Saturday.
`gap()`	Returns a tuple representing an exclusive gap between two disjoint ranges of ordinal values.
`gregorian`	Represents the implementation of all calculations for the rules based on Gregorian Calendar.
`gregorianDate()`	Returns a gregorian calendar date according to the specified year, month and date values.
`gregorianYearMonth()`	Returns a gregorian year and month calendar according to the specified year and month values.
`hours`	Common properties of hour time unit.
`intersect()`	Returns if two ranges has intersection.
`january`	January.
`july`	July.
`june`	June.
`march`	March.
`may`	May.
`milliseconds`	Common properties of millisecond time unit.
`minutes`	Common properties of minute time unit.
`monday`	Monday is the day of the week that follows Sunday and precedes Tuesday.
`monthOf()`	Returns month of year specified by the input argument.
`months`	Common properties and constraints of months.
`november`	November.
`now()`	Obtains the current instant from the system clock.
`october`	October.
`offsetTime()`	Returns an implementation of a clock that always returns a constant offset from the value of the provided clock.
`overlap()`	Returns the inclusive overlap between two ordinal ranges.
`parseDate()`	The `Date` value of the given string representation of a ISO 8601 date format or `null` if the string does not contain…
`parseDateTime()`	The `DateTime` value of the given string representation of a ISO 8601 datetime format or `null` if the string does not…
`parseDayOfWeek()`	Parses a string into a DayOfWeek.
`parseLinkLine()`
`parseMonth()`
`parseOnDay()`
`parsePeriod()`
`parseRuleLine()`
`parseTime()`	The `Time` value of the given string representation of a ISO 8601 date format or `null` if the string does not contain…
`parseTimeZone()`	Timezone offset parser based on ISO-8601, currently it accepts the following time zone offset patterns:
`parseUntil()`
`parseZoneDateTime()`	The `ZoneDateTime` value of the given string representation of a ISO 8601 zoned datetime format or `null` if the string…
`parseZoneFormat()`
`parseZoneLine()`
`parseZoneRule()`
`rd()`	Converts Rata Die day number to a fixed date value.
`round()`	Returns nearest integer to x
`saturday`	Saturday is the day of the week that follows Friday and precedes Sunday.
`seconds`	Common properties of second time unit.
`september`	September.
`standardZoneFormat`
`standardZoneRule`
`sunday`	Sunday is the day of the week that follows Saturday and precedes Monday.
`systemTime`	Gets a clock that obtains the current instant using the best available system clock.
`thursday`	Thursday is the day of the week that follows Wednesday and precedes Friday.
`time()`	Creates new instance of `Time`.
`timeZone`	Common utility methods for getting time zone instances.
`today()`	Returns current date according to the provided system clock and time zone.
`tokenDelimiter()`
`tuesday`	Tuesday is the day of the week that follows Monday and precedes Wednesday.
`unixTime`	Common properties of Unix time.
`untilPresent`
`wednesday`	Wednesday is the day of the week that follows Tuesday and precedes Thursday.
`weekdays`	List of all available weekdays.
`yearMonth()`	Returns a year and month representation based on the specified values.
`years`	Common properties and constraints of year unit.
`zero`	A period of zero length.
`zoneDateTime()`	Returns a `ZoneDateTime` based on the specified `TimeZone`, year, month, day of month, hour, minute, second and millisecond…

Keyboard Shortcuts

Documentation:

Search page:

Filter declarations by tags

Index